Image to STL Online

Same format, different source

JPEG to STL Converter

Convert a .jpeg file into a printable STL in your browser. Same engine as JPG, with notes on the exports that need cleaning up first.

  • A .jpeg file converts exactly like a .jpg, no renaming needed
  • Re-export CMYK and layered files as flat sRGB before converting
  • 15 MB limit, up to 300 px of detail, output in millimetres
PNG, JPG, WebP or SVG · up to 15 MB · or drop it here No image loaded

Load an image and the 3D preview shows up here. Drag to rotate, scroll to zoom.

—

Files stay on your device — nothing is uploaded, no account needed.

.jpeg and .jpg are the same format

Two spellings, one codec. A file called portrait.jpeg and one called portrait.jpg decode identically, and this converter treats them the same way: it reads the picture, turns brightness into height and writes a binary STL.

So the question is not which extension you have, but where the file came from — and that changes what needs fixing before you convert.

Where .jpeg files usually come from

A checklist for exported files

  1. Look at it first. Open the file and confirm it is the right crop and the right way up.
  2. Flatten it. Layered exports, clipping paths and spot colours cannot survive the trip into a heightmap; export as a single flattened image.
  3. Check the colour space. sRGB, 8 bit. CMYK and 16-bit exports are where conversions go wrong.
  4. Exported from a vector? If the artwork exists as SVG or PDF, convert the vector instead — the edges will be far cleaner. Use SVG to STL.
  5. Then convert in the panel above: width, base thickness, max relief height, detail, relief or lithophane.

What the output is

A watertight binary STL in millimetres, roughly 160,000 triangles at 200 px detail, printable on any FDM machine. It is a heightmap relief — the picture raised or thinned — not a rebuilt 3D object, so one photo gives you one face of a model.

Limits

15 MB per file. Detail caps at 300 px on the long edge. Everything happens on your device, so there is no queue and no upload time.

Want the photo workflow in full? Read photo to STL, or go straight to the image to STL converter.

Questions

Common questions

Do I need to rename .jpeg to .jpg?

No. They are the same format and the converter accepts both extensions and both MIME types.

Why does my exported JPEG look wrong after conversion?

Most likely it is CMYK or has an embedded colour profile the browser reads differently. Re-export as flat sRGB, 8 bit, and try again.

Progressive JPEGs — do they work?

Yes. Browsers decode progressive and baseline JPEGs the same way before the pixels ever reach the converter.

Can I convert a JPEG that came out of a PDF?

You can. If you still have the source vector, convert that instead: a rasterised extraction is low resolution and prints soft.