Letters with real depth
Type a word, set a letter height, and you get an STL with raised letters on a base plate. The letters are real geometry, not a texture: they stand 0.6–12 mm above the plate, so they catch light, take paint and survive being handled.
Common uses: desk nameplates, wedding place cards, cake toppers minus the stick, keychain tags, signage for a shop door, and the label on the front of a 3D printer enclosure.
How the generator works
The text is drawn into an off-screen canvas in the font you pick, the canvas is read back as a brightness grid, and dark letter pixels become the high end of the height range. The base plate is the low end. That whole surface is then closed into a solid, exactly like a photo relief.
The practical consequence: whatever the browser can render as a font, you can print. Serif, sans and monospace are the three choices in the panel above because they cover the differences that matter — stroke contrast, letter width and where the thin parts are.
Sizing letters so they print
- Letter height (mm) is the cap height in the print. Below 8 mm, serifs and thin strokes merge; above 40 mm, a sans face starts looking generic and a serif face starts looking elegant.
- The thinnest stroke must be at least two extrusion widths. A serif face at 10 mm has hairlines around 0.4 mm — right at the edge with a 0.4 mm nozzle. Go up to 15 mm or switch to sans for anything small.
- Letter depth of 1.5–2.5 mm holds detail and still prints in one piece.
- Base plate of 1–2 mm keeps the model stiff; a longer phrase on a thin plate warps.
Raised or engraved
Raised is the default and the right choice for most prints: letters stand proud, print cleanly and can be painted. Engraved letters (tick the option above) are cut into the plate instead — better for anything that will be touched constantly, like a plant label or a tool tag, because the plate protects the lettering.
Fonts and print quality
Monospace gives evenly spaced, sturdy letters — ideal for numbers and codes. Sans serif is the safest overall. Serif reads as formal but loses its character below 12 mm of cap height. Avoid cursive and display faces with extreme thin strokes.
What the download gives you
A binary STL in millimetres, watertight, with the plate perfectly flat on the bed. Slice it at 0.12–0.2 mm layers; no supports are needed while the letters are wider than they are tall. If a letter is taller than 3 mm and has an overhang, add a brim and slow the outer wall down.