Look at the mesh before you print it
An STL has no idea what it represents — it is a bag of triangles. A viewer is how you find out whether the file you downloaded is the model you expected: the right size, the right way up, not hollow, not full of holes.
Drop an STL above and the browser parses it, counts the triangles and draws it. Drag to rotate, scroll to zoom. The file never leaves your device, so a client's part or an unreleased design is not going anywhere.
What the viewer tells you
- Triangle count. A relief from the image to STL converter sits around 160,000 at 200 px detail. A model with far fewer is probably low-poly or a placeholder.
- Bounding box in millimetres. This is the real size your slicer will use. A “50 mm” model that measures 500 mm is a unit problem, usually inches converted badly.
- Orientation. Which face is up, and does the flat side sit on the bed.
- Holes and inversions. With a solid shading model, flipped normals show as dark patches that do not respond to the light the way their neighbours do.
Binary and ASCII both work
Most slicers export binary STL — compact, 50 bytes per triangle. Older software writes ASCII STL, which is bigger and readable as text. The viewer checks the binary header first and falls back to parsing the text, so either opens.
Limits: 60 MB per file, which covers a relief at maximum detail and most printable parts. Bigger scans belong in your slicer or a desktop viewer.
What it is not
It is not a converter and it does not repair meshes. It will not tell you whether a wall is too thin to print, and it does not check for self-intersections. For conversion, use the image to STL converter; for repair, use your slicer's built-in tools or a mesh editor.
A sanity check before printing
- Load the STL and read the bounding box against the size you asked for.
- Rotate it: does the picture face the right way? A relief that looks mirrored was converted in the wrong mode.
- Check the flat back — that is the face that goes on the bed.
- Then slice. If the slicer shows a wildly different triangle count, the file was probably truncated in transit.