Vector art into printable geometry
An SVG has no pixels — it has shapes, and the browser draws them at the size you give it. This converter leans on that: it renders your SVG into a grid, reads the brightness of every cell and builds the heightmap mesh from it. The result is one solid STL with a flat back, ready for a slicer.
The good part: an SVG of a mark or a wordmark converts with razor-clean edges as long as the detail grid is fine enough to resolve them.
Before you convert
- Size the SVG properly. An SVG with no explicit width and height renders at a default size; the converter falls back to 600 px. Add a viewBox to the file, or open it at the width you want in a browser and screenshot it.
- Check strokes. A 1 px stroke at 600 px wide is one pixel of height. At 100 mm wide that is 0.17 mm of feature — under a nozzle width. Thicken thin strokes in the editor, or convert at 300 px detail.
- Flatten text to paths. Fonts referenced inside an SVG do not exist in the browser that converts it, so text may render as a fallback face. Convert text to outlines first, or use the text to STL generator instead.
- Mind the background. A transparent SVG is composited onto white, which becomes the base level — exactly what you want for a logo plate.
What converts well
Icons, badges, wordmarks, pictograms, single-colour illustrations and map shapes all come out clean. Line-art drawings print as thin raised lines that need at least 0.8 mm of relief depth to survive a 0.4 mm nozzle. Photorealistic SVG exports (yes, those exist) behave like a picture instead.
Detail and depth
Set detail to 300 px for vector art — the extra grid resolution is what keeps a curve a curve. Depth of 1.5–3 mm is enough for a logo plaque; less and the relief is invisible under room light, more and thin parts become fragile towers.
After the conversion
Drop the STL into your slicer and check the smallest feature. Anything narrower than two extrusion widths will disappear. If you want to see the triangles first, load the file in the STL viewer.
Need an image rather than vector art? Start with the image to STL converter.